#Xbox one liquid metal controller setup full

In other words, even if TIM, a liquid metal that leads to increased costs, is adopted, the total cost of cooling can be вЂњreducedвЂќ as a result. If thermal grease was used, then an expensive heat sink would have been used for high cooling performance. Liquid Metal TIMs are usually expensive, but if it was efficiently used near the heat source, then the other hardware parts like the heat sink and cooling fan will not be expensive. So if it was smaller, then the cost will be lower and have lesser defects, which led to an improvement in yield. SoC dies are small since the size is usually linked to its cost and yield.

#Xbox one liquid metal controller setup full

The reason behind that is that it basically runs at almost full power during games. In particular, the heat density of the PS5вЂ™s SoC is way higher than the PS4.

Otori stated that the use of liquid metal was chosen because the SoC had a high operating frequency, but the die is small and the heat density is very high. They also did many studies first for the adoption of TIM for liquid metals from manufacturing to procurement.

It was revealed that the use of the liquid metal had already been in the plans about two years ago when the hardware development team decided on the hardware configuration and shape for the PS5. With the use of the liquid metal, the console significantly quieter compared to its predecessor, the PS4. Without it, the housing would have been larger than the current design and the cooling fan would be louder. This was used as the heat conductive material or TIM that transfers the heat generated by the main processor to the heat sink. Sony Interactive EntertainmentвЂ™s Yasuhiro Otori recently spoke to Nikkei in an exclusive interview to discuss the real reason for choosing liquid metal as a heat conductive material for the PlayStation 5.ДЄccording to Otori, he really wanted to use liquid metal for the PS5.